PROCESS SIMULATION OF THE STRIP REELING ON THE COLD ROLLING MILL COILER
DOI:
https://doi.org/10.14529/power190110Keywords:
COLD ROLLING MILL, ELECTRIC DRIVE, MODELING, TENSION CONTROL, DYNAMIC PROPERTIESAbstract
The paper analyses the dynamic properties of a complex multi-motor electromechanical “cage – strip –
coiler” system for a cold rolling mill, the technological modes of which feature significant speed changes during
the rolling. Indirect belt tension control systems applied to boost the adjustment accuracy by reeling up the coiler
should provide the compensation nodes of the dynamic current drive. Mechanical losses changing at non-linear
velocity dependence affect on the mill regulation accuracy. This also demands for the additional loss compensation unit. Strip tension adjustment accuracy depends on those units installation. The system has a complex multimotor structure. The forenamed conditions require conducting analysis with modeling methods. This paper presents a model of a complex multi-motor system, which provides for the research and installation of the regulation system units in different modes.
Downloads
References
Radionov A.A., Gasiyarov V.R., Shubin A.G., Khramshin R.R. Methods of Calculation of Load Modes of
Roughing Stand Electric Drives of Wide-Strip Hot Rolling Mill. 13th International Scientifictechnical Conference
on Actual Problems of Electronic Instrument Engineering. Proceedings: in 12 volumes, 2016, pp. 160–164. DOI:
1109/APEIE.2016.7807045
Karandaev A.S., Radionov A.A., Gasiyarov V.R., Loginov B.M. Setting Automated Roll Axial Shifting
Control System of Plate Mill. Procedia Engineering, 2017, pp. 1753–1760. DOI: 10.1016/j.proeng.2017.10.709
Radionov A.A., Gasiyarov V.R., Maklakova E.A. Improving Reliability of Hot Plate Mill Electromechanical
System. Key Engineering Materials, 2016, vol. 685, pp. 417–421. DOI: 10.4028/www.scientific.net/KEM.685.417
Evdokimov S.A., Evdokimov A.S., Karandaev A.S., Radionov A.A. Strategy of Vibration Diagnostic Control of Mill Equipment Condition. Proceedings of 2015 International Conference on Mechanical Engineering,
Automation and Control Systems, MEACS, 2015, 7 p. DOI: 10.1109/MEACS.2015.7414861
Radionov A.A., Maklakov A.S., Gasiyarov V.R., Maklakova E.A. Research of electric drive at load impact
on hot plate mill 5000. Proceedings of 2015 International Conference on Mechanical Engineering, Automation
and Control Systems, MEACS, 2015, 6 p. DOI: 10.1109/MEACS.2015.7414864
Hemakumar B., Aminur A.M.R.B., Prasad M.P.R. Performance Improvement in Hot Strip Rolling Mills by
Improving Looper System. Proceedings of the 2nd International Conference on Trends in Electronics and Informatics, ICOEI, 2018, pp. 827–832. DOI: 10.1109/ICOEI.2018.8553709
Druzhinin N.N. Nepreryvnyye stany kak ob”yekt avtomatizatsii [Continuous Mills as an Automation Object]. Moscow, Metallurgy Publ., 1975. 336 p.
Shokhin V.V., Permyakova O.V. [Investigation of the Force Interaction of Electric Drives of the Continuous
Rolling Mill]. Proceedings of the VIII International (XIX Nationwide) Conference on Automated Electric Drive of
AEP-2014: in 2 vol. Saransk: Publishing House Mordov. University Press, 2014, vol. 2, pp. 342–347. (in Russ.)
Karandaev A.S., Khramshin V.R., Galkin V.V., Lukin A.A. [Mathematical Modeling of Thyristor Structure
with Switchable]. Izvestiya vuzov. Elektromekhanika [Russian Elecromecanics], 2010, no. 3, pp. 47–53. (in Russ.)
Khramshin V.R., Andryushin I.Yu., Gostev A.N., Karandaev A.S. [Mathematical Model of Interrelated
Electrical Systems of Continuous Train of Wide Strip Rolling Mill]. Russian Internet Journal of Industrial Engineering, 2013, no. 1, pp. 12–21. (in Russ.)
Shokhin V.V., Permyakova O.V. The Study of Continuous Rolling Mill Inter-Stand Tension Inferential
Control Systems. Procedia Engineering, 2015, vol. 129, pp. 231–238. DOI: 10.1016/j.proeng.2015.12.038
Khramshin V.R., Radionov A.A., Kornilov G.P., Odintsov K.E. Improvement of Electric and Mechanical
System for Automated Strip Tension Control at Continuous Wide-Strip Hot-Rolling Mill. Procedia Engineering,
, vol. 150, pp. 11–17. DOI: 10.1016/j.proeng.2016.07.208
Khramshin V.R. Ways to Compensate for Static Deviations in Speed in Electric Drives of BroadStrip Hot Rolling-Mill Stands. Russian Electrical Engineering, 2013, vol. 84, no. 4, pp. 221–227. DOI:
3103/S1068371213040032
Shilyaev P.V., Andryushin I.Yu., Golovin V.V., Radionov A.A., Karandaev A.S., Khramshin V.R. Algorithms of a Digital Automatic System for Tension and Loop Control in a Widestrip Hot-Rolling Mill. Russian
Electrical Engineering, 2013, vol. 84, no. 10, pp. 533–541. DOI: 10.3103/S106837121310009X
Shokhin V.V., Permyakova O.V., Korotkova E.V. [Modeling of Interconnected Variable-Frequency Electric Drives of the Rolling Mill]. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes],
, no. 21, pp. 70–75. (In Russ.)
Shokhin V.V., Andreev A.I., Morkovina P.S. Simulation of a Rolling Mill Using Physical and Mathematical Models. Elektrotekhnicheskie sistemy i kompleksy [Electrotechnical Systems and Complexes], 2017, no. 2 (35),
pp. 13–18. (in Russ.) DOI: 10.18503/2311-8318-2017-2(35)-13-18
Shokhin V.V., Khramshin V.R., Nowicki R.Yu. Mathematical Simulation of Roughing Electric Drives of
Bar and Shape Mill Mounted at Arch-Furnace Plant of Magnitogorsk Iron and Steel Works, OJSC. Bulletin of
the South Ural State University. Ser. Power Engineering, 2017, vol. 17, no. 2, pp. 58–66. (in Russ.) DOI:
14529/power170208
Chernykh I.V. Modelirovaniye elektrotekhnicheskikh ustroystv v MATLAB, SimPowerSystem i Simulink
[Modeling Electric Devices in MATLAB, SimPowerSystem and Simulink]. Moscow, DMK Press Publ., 2008. 288 p.
German-Galkin S.G. Matlab&Simulink. Proyektirovaniye mekhatronnykh sistem na PK [Matlab &
Simulink. Designing mechatronic systems on a PC]. Saint Petersburg, Korona. Vek Publ., 2014. 368 p.
Terekhov V.M., Osipov O.I. Sistemy upravleniya elektroprivodov: ucheb. dlya vuzov [Control System of
Electric Drives: Textbook for Higher Schools]. Moscow, Academia publishing center, 2006. 304 p.