STUDYING THE PROCESS OF HEAT AND MASS TRANSFER IN THE PRE-SCRUBBER OF BLAST-FURNACE GAS WET SCRUBBING SYSTEM DESIGNED BY PAUl WURTH CO.
DOI:
https://doi.org/10.14529/power180101Keywords:
blast-furnace gas, pre-scrubber, mean droplet diameter, evaporation, condensationAbstract
Blast furnace gas is a secondary product of cast-iron smelting. Nowadays, many metallurgy companies in Russia and Europe use blast furnace gas scrubbing systems designed by the Luxembourg-based company Paul Wurth. Speaking of the efficiency and energy cost of purifying blast-furnace gas by such scrubbing system, the heat-and-mass transfer in the pre-scrubber is of utmost importance. The paper presents computational analysis of pre-scrubber heat-and-mass transfer for different dispersed processed water drop sizes. Computations are based on heat balance equations for droplets of dispersed process water flowing in the stream of impure blast-furnace gas. The analogy of heat energy and mass transfer processes is used for computing the heat and mass loss factors.
Downloads
References
Geerdes, M. Modern blast furnace ironmaking / М. Geerdes. – Dusseldorf: Verlag Stahleisen GmbH, 2004. – 118 с.
Biswas, A. Principles of blast furnace ironmaking: Theory and practice / A. Biswas. – Brisbane: Cootha Publishing House, 1981 – 528 p.
Babich, A. Ironmaking. Textbook / A. Babich. – Aachen: RWTH Aachen University Department of Ferrous Metallurgy, 2006. – 402 p.4. Старицкий, В.И. Газовое хозяйство заводов черной металлургии / В.И. Старицкий. – М.: Металлургия, 1973. – 496 с.
Белоусов, В.В. Теоретические основы процессов газоочистки / В.В. Белоусов. – М.: Металлургия, 1988. – 256 с.
Сталинский, Д.В. Решение проблем очистки доменного газа и энергосбережения / Д.В. Сталинский, Г.М. Каненко, В.В. Алхазов // Сталь. – 2008. – № 6. – С. 85–90.
Сперкач, И.Е. Новые технологические и технические решения по газоочистной системе доменной печи / И.Е. Сперкач // Сталь. – 2007. – № 3. – С. 97–103.
Сталинский, Д.В. Результаты испытания новой системы очистки доменного газа / Д.В. Сталинский, Г.М. Каненко, В.В. Алхазов // Сталь. – 2009. – № 5. – С. 73–75.
Хавкин, Ю.И. Центробежные форсунки / Ю.И. Хавкин. – Л.: Машиностроение, 1976. – 168.
Старк, С.Б. Пылеулавливание и очистка газов в металлургии / С.Б. Старк. – М.: Металлургия, 1977. – 328 с.
Лобасова, М.С. Тепломасcообмен. Электронный учебно-методический комплекс / М.С. Лобасова, К.А.Финников, Т.А. Миловидова. – Красноярск: ИПК СФУ, 2009. – 292 с.
Телегин, А.С. Тепломассоперенос: учеб. пособие для вузов / А.С. Телегин, В.С. Швыдкий, Ю.Г. Ярошенко. – М.: Металлургия, 1995. – 400 с.
Nise, N.S. Control System Engineering / N.S. Nise. – 3rd ed. – USA: Jonh Wiley & Sons, Inc., 2000. – 970 p.
Incropera, F.P. Fund mentation of heat and mass transfer / F.P. Incropera. – USA: Jonh Wiley & Sons, Inc., 2011. – 999 p.
Holman, J. Heat Transfer / J. Holman. – USA: McGraw-Hill Science, 1986. – 702 p.
Theodore, L. Transfer Applications for the Practicing Engineer / L. Theodore. – USA: Wiley, 2011. – 664 p.
Han, J-C. Analytican Heat Transfer / J-C. Han. – USA: CRC Press, Taylor & Francis Group, 2012. – 303 p.
Karwa, R. Heat and Mass Transfer / R. Karwa. – USA: Springer, 2017. – 1039 p.
Leal, L.G. Advanced Transport Phenomena: Fluid Mechanics and Convective Transport Processes / L.G. Leal. – United Kingdom: Cambridge University, 2007. – 934 p. DOI: 10.1017/CBO9780511800245
Юдашкин, М.Я. Пылеулавливание и очистка газов в черной металлургии / М.Я. Юдашкин. – М.: Металлургия, 1984. – 320 с.