PROCESSES OF POLLUTION AND CLEANING OF TURBINE OIL IN LUBRICATION SYSTEMS OF STEAM TURBINES

Authors

  • K.V. Osintcev South Ural State University, Chelyabinsk, Russian Federation
  • N.A. Pshenisnov South Ural State University, Chelyabinsk, Russian Federation
  • A.I. Pshenisnov Limited Liability Company “EnergoService”, Chelyabinsk, Russia

DOI:

https://doi.org/10.14529/power220309

Keywords:

steam turbine, turbine oil, housing filters, turbine oil supply, working fluid

Abstract

The dependence of the parameters (cleanliness, contamination and purification) of the working fluid of
the bearing lubrication system and steam turbine control is obtained. Filters are intended to purify by removing solid
contaminants that are harmful to the oil and the machine. If the filter is doing a good job, it is removing contaminants as
fast as they are entering (ingression). This is known as mass balance. The number of particles coming into the oil system (particle ingression) equals the number being caught by the filter (particle removal); this achieves a stabilized and
controlled oil cleanliness level. The effect of air dispersed in oil on the operation of frame filters in steam turbine lubrication systems was analyzed. It has been established that when filtering aerated oil, soft particles (gas bubbles) increase the screening ratio of solid contaminants by more than 4 times. Calculations show that air dispersed in oil increases the purity of the filtrate in the system by 21 times.

Downloads

Download data is not yet available.

References

Majka W., Klima T. Hydrodynamic Cleaning and Flushing of Turbine Oil Systems // Machinery Lubrication. 2013. No. 12. P. 1–3.

Analysis of Particulate Contamination in Turbine Oil / P. Yu, Y.-q. Chen, S.-h. Liu et al. // Turbine technology. 2003. No. 45 (4). P. 194–195.

Пшениснов А.И. Загрязнение, очистка турбинного масла в системах смазки паровых турбин и модернизация рамных фильтров: доклад // Международная научно-техническая конференция «80 лет уральской теплоэнергетике. Образование. Наука» / Уральский государственный технический университет. Екатеринбург, 2003. 12 c.

Повышение эффективности очистки турбинного масла / Е.В. Торопов, И.Ф. Пшениснов, А.И. Пшениснов, Я.И. Пшениснов // Энергетика. Известия высших учебных заведений и энергетических объединений СНГ. 2004. № 2. С. 61–67. DOI: 10.21122/1029-7448-2004-0-2-61-67

Mitigation of triboelectric charging in paper machine hydraulic and lubrication fluids / C. Kan, J. Li, B. Christian et al. // Light Industry Machinery. 2011. No. 29 (2). P. 45–48.

Brown K. Managing the health of fire-resistant steam turbine electrohydraulic (EHC) control oils // Machinery Lubrication. 2001. No. 5. P. 2–4.

Xiu S.C., Gao S.Q., Sun Z.L. Analysis of thermal properties of super-high speed hybrid journal bearing based on ANSYS // Adv. Mater. Rec. 2010. No. 118. P. 753–757. DOI: 10.4028/www.scientific.net/AMR.118-120.753

Рыбаков К.В., Коваленко В.П. Фильтрование авиационных масел и специальных жидкостей. М.: Транспорт, 1977. 188 с.

Барышев В. И. Классификация, контроль и нормирование промышленной чистоты рабочих жидкостей // Вестник ЮУрГУ. Серия «Машиностроение». 2005. № 1. С. 149–161.

Fitch J. The anatomy of a filter inspection report // Machinery Lubrication. 2022. No. 2. P. 4–6.

Музыкин А.Д., Попова И.М. Удаление пузырьков воздуха из жидкости с помощью сеток // Вестник машиностроения. 1982. № 4. C. 12–15.

Johnson M., Livingstone G. Identifying varnish and oxidation precursors in lubricant sumps // Tribology and Lubrication Technology. 2011. No. 67 (4). P. 2–7.

Коновалов В.М., Скрицкий В.Я., Рокшевский В.А. Очистка рабочих жидкостей в гидроприводах станков. М.: Машиностроение, 1976. 261 с.

Study on sludge formation during the oxidation process of turbine oils / A. Yano, S. Watanabe, Y. Miyazaki et al. // Tribology Transactions. 2004. No. 47 (1). P. 111–122. DOI: 10.1080/05698190490278985

Левич В.П. Физико-химическая гидродинамика. М.: Физматгиз, 1959. 240 с.

Multi-parameter prediction modeling for analyzing the trend of turbine oil online monitoring parameters / K. Yang, Y. Qiu, P. Song et al. // Prognostics and System Health Management Conference (PHM-2014 Hunan).

P. 301–304. DOI: 10.1109/PHM.2014.6988183

Пшениснов И.Ф., Пшениснов Я.И. Диагностирование состояния подшипников турбоагрегатов по чистоте масла в системе маслоснабжения // Электрические станции. 1989. № 2.

Жужиков В.А. Фильтрование. М.: Гос. науч.-техн. изд-во хим. лит., 1961.

Лейчкис И.М. Фильтрование с применением вспомогательных веществ. Киев: Техника, 1975.

Gong X. Online nonintrusive condition monitoring and fault detection for wind turbines // Theses, Dissertations, and Student Research from Electrical & Computer Engineering. University of Nebraska-Lincoln. 2012;46.

Аксенов А.Ф., Белянский В.П. Растворимость воздуха в углеводородных жидкостях // Вопросы авиационной химотологии: межвуз. сб. науч. тр. Киев: КИИГА, 1985.

Published

2022-05-05

How to Cite

[1]
Osintcev, K., Pshenisnov, N. and Pshenisnov, A. 2022. PROCESSES OF POLLUTION AND CLEANING OF TURBINE OIL IN LUBRICATION SYSTEMS OF STEAM TURBINES. Bulletin of the South Ural State University series "Power Engineering". 22, 3 (May 2022), 83–89. DOI:https://doi.org/10.14529/power220309.