THE PRACTICAL IMPLEMENTATION OF RELAY CONTROL OF CURRENT AS MAIN PART IN SYSTEM OF ACTIVE FILTER OF ELECTRIC POWER
Abstract
Here is a simple and effective control system of parallel active power filter. This parallel active power filter can improve the quality of the mains voltage when using non-linear loads. This is achieved by a significant reduction in the parallel active power filter harmonic current load and load power factor correction, while avoiding the risk of resonance phenomena typical of passive filters. This control system is a parallel active power filter may be used either in single phase mains or in three phase mains. We offer method of applying developed control system of parallel active filter. Mathematic model of parallel active power filter has been developed in Matlab 7.11, and its modeled results have been shown as obtained from filter performing for active-inductive load. In order to verify the obtained mathematic results of modeling process Matlab 7.11 set up has been designed in order to do research of current relay controller (RCC). On this installation has been confirmed by practical ability to use the RCC as a key element for the creation of the proposed control system is a parallel active power filter.
Downloads
References
ABB insider. -2011. -№ 5. -S. 5.
Контекст: ...Energy consumption in world will increase by 49 % [1] during 2007-2035 years based on results of international researches executed by Bloomberg BusinessWeek Research Services and ABB company in August, 2011...
Качанов, А.Н. Особенности работы микропроцессорных систем управления в электротехнических комплексах с непрерывным технологическим процессом/А.Н. Качанов, В.Л. Кукоба//Вести высших учебных заведений Черноземья. Электроэнергетика. -2009. -№ 2(16). -С. 26-29.
Контекст: ...Nowadays part of nonlinear electric loads is 60 % of all loads [2], so the problem to provide required quality of supplied electric power is one of main problems for energy industries, and as level of energy consumption will be increase in future, this problem will become critical increasingly [3]...
Harmonic Trend in the USA: A Preliminary Survey/I.M. Nejdawi, A.E. Emanuel, D.J. Pileggi et al.//IEEE Transactions on Power Delivery. -1999. -Vol. 14. -№ 4. -P. 1488-1494.
Контекст: ...Nowadays part of nonlinear electric loads is 60 % of all loads [2], so the problem to provide required quality of supplied electric power is one of main problems for energy industries, and as level of energy consumption will be increase in future, this problem will become critical increasingly [3]...
Жежеленко, И.В. Высшие гармоники в системах электроснабжения промпредприятий/И.В. Жежеленко. -2-е изд. перераб. и доп. -М.: Энергоатомиздат, 1984. -160 с.
Контекст: ...Increasing part of nonlinear loads relates to employment of electric arc steel-smelting induction furnaces, transformers, discharge lamps [4, 5] and as well that semiconductor devices and devices based on ones (such as static converters, welders, domestic and office equipment etc.) are quickly developed and distributed in world [6]...
...devices and worsening their characteristics, reducing lifetime of main electric equipment of energy systems, reducing reliability and having fault in automatic and microprocessor-based systems performance [4-9]...
...It should be to note that nonlinear distortions in mains on hand of consumers are nearly reasoned by own actions of consumers in their areas, and seldom they are brought with mains [4, 11, 13]...
Curtarelli, F. Current harmonic in industrial power systems arisen from AC/DC converters/F. Curtarelli, В. Deifino, G.B. Denero//ГРЕС83 Transaction-Tokyo. -1983. -P. 1016-1024.
Контекст: ...Increasing part of nonlinear loads relates to employment of electric arc steel-smelting induction furnaces, transformers, discharge lamps [4, 5] and as well that semiconductor devices and devices based on ones (such as static converters, welders, domestic and office equipment etc.) are quickly developed and distributed in world [6]...
...devices and worsening their characteristics, reducing lifetime of main electric equipment of energy systems, reducing reliability and having fault in automatic and microprocessor-based systems performance [4-9]...
